2.8mm Wooden Venetian Blind Cord – Lift & Tilt Cord - Brown
Product Overview
Replacement 2.8mm cord for wooden Venetian blinds, commonly used on 35mm and 50mm wooden Venetian blind systems.
This cord can be used for both the lifting and tilting operation of compatible wooden Venetian blinds, making it ideal for replacing worn, frayed or broken cords and for complete blind re-cording.
Supplied in your selected length.
Key Features
2.8mm diameter Venetian blind cord
Commonly used with 35mm and 50mm wooden Venetian blinds
Suitable for lift cords
Suitable for tilt cords
Ideal for replacing worn, frayed or broken cord
Suitable for complete wooden Venetian blind re-cording
Cut to your selected length
How Much Cord Do I Need?
As an approximate guide, allow around:
2.5 × the drop of the blind for each cord being replaced
For example, if your blind has a 150cm drop, allow approximately:
150cm × 2.5 = 375cm (3.75 metres) per cord
Therefore, if replacing three lift cords on a 150cm drop blind, you would need approximately 11.25 metres in total.
This is a guide only. Cord requirements can vary depending on the design, size and cord routing of the individual blind.
Where possible, measure the existing cords before removal and allow a little extra cord for threading, tying and final adjustment.
Re-Cording a Wooden Venetian Blind
If one lift cord has worn or broken, we recommend replacing all of the lift cords at the same time.
The remaining original cords are likely to have experienced similar levels of wear. Mixing old and new cords can also result in uneven operation.
Replacing the cords together helps ensure the blind raises evenly and operates correctly.
Common Uses
Replacing a broken wooden Venetian blind lift cord
Replacing worn or fraying cords
Complete wooden Venetian blind re-cording
Replacing a wooden Venetian blind tilt cord
Repairing 35mm wooden Venetian blinds
Repairing 50mm wooden Venetian blinds
Compatibility
2.8mm cord is used in the majority of 35mm and 50mm wooden Venetian blind systems, but specifications can vary between manufacturers.
We strongly recommend checking the diameter of your existing cord before ordering.
If possible, compare your original cord with the measurements and photographs shown on this product page.
Important Information
This listing is for 2.8mm replacement cord.
Please select the total length required when ordering.
When completely re-cording a blind, remember to calculate the approximate requirement for each individual cord, rather than simply using 2.5 times the blind drop for the entire blind.
