top of page
Vertical Blind Fixes
Vertical blinds can often be repaired quickly using the right parts. Whether your slats won’t rotate or your chain has snapped, you can find the correct vertical blind spare parts to fix the issue.
Common vertical blind problems
• Uneven spacing between slats
• Noisy operation when opening or closing
How to fix common vertical blind problems
Slats won’t rotate or twist properly
🔎LIKELY CAUSE :This is usually caused by a worn or faulty tilt mechanism inside the headrail.
🛠️SOLUTION: Replace the internal mechanism to restore smooth rotation.
▶️VIDEO GUIDE :
📖DETAILED GUIDE : See Blog
💡EXPERT TIP :
Vertical blind slats falling out at the top
🔎LIKELY CAUSE :This is typically due to broken or worn hooks that hold the slats in place.
🛠️SOLUTION : Replace damaged Vertical Blind hangers
🛒SHOP : vertical blind hangers
▶️VIDEO GUIDE :
📖DETAILED GUIDE : See Blog
💡EXPERT TIP :
Bottom chain snapped or missing
🔎LIKELY CAUSE :The chain connecting the weights can become brittle over time and break.
🛠️SOLUTION : Fit a new chain to reconnect the slats evenly.
🛒SHOP : vertical blind bottom chains
▶️VIDEO GUIDE :
📖DETAILED GUIDE : See Blog
💡EXPERT TIP
Slats uneven or not hanging straight
🔎LIKELY CAUSE :This is often caused by missing or damaged weights at the bottom of the slats.
🛠️SOLUTION : Replace or add new weights to stabilise the blind.
🛒SHOP vertical blind weights
▶️VIDEO GUIDE :
📖DETAILED GUIDE : See Blog
💡EXPERT TIP :
Control chain slipping or not working
🔎Likely Cause :If the chain turns but nothing happens, the internal mechanism is likely worn.
🛠️SOLUTION : Replace the tilt mechanism or chain depending on the fault.
🛒SHOP : vertical blind control mechanism
▶️VIDEO GUIDE :
📖DETAILED GUIDE : See Blog
💡EXPERT TIP :
Track sticking or difficult to operate
🔎LIKELY CAUSE :Dirt, wear, or damaged internal runners can cause resistance.
🛠️SOLUTION : Clean the track or replace worn internal parts.
🛒SHOP : vertical blind track components
▶️VIDEO GUIDE :
📖DETAILED GUIDE : See Blog
💡EXPERT TIP :
Missing or damaged vertical blind weights
🔎LIKELY CAUSE : Lost or damaged
🛠️SOLUTION : Order new weights
📖DETAILED GUIDE : See Blog
▶️VIDEO GUIDE :
💡EXPERT TIP :
🔎LIKELY CAUSE : Vanes / slats overlapping
Vertical blind slats are misaligned or stuck
🛠️SOLUTION : Turn vanes to open position, Manually correct any vanes overlapped the wrong way and realign track , if necessary.
🛒SHOP : Nothing necessary
▶️VIDEO GUIDE :
📖DETAILED GUIDE : See Blog
💡EXPERT TIP : When drawing blinds back , try to always have vanes open
Bent or damaged headrail affecting movement
🔎LIKELY CAUSE : Physical damage
🛠️SOLUTION : Replace Track
💡EXPERT TIP : Make sure you buy new track for your vane size 89mm / 127mm
Most vertical blind issues can be resolved by replacing worn components such as vertical blind hangers, weights, or the headrail mechanism. Browse our full range of vertical blind parts to restore smooth operation.
Repair Guides (Coming Soon)
Replacing vertical blind runners
If a very handy DIY person then you can replace the Vertical Blind trucks.
Expert Tips
-
If your vertical blind track is a bit sticke or stiff, try and spray a bit of silicone spray on the track. Can do wonders
Related Guides
bottom of page